Five 3D printed Christmas ducks lined up after printing

How a 3D Printed Duck Gets Made (and Why the Gingerbread One Takes 11 Hours)

What actually happens between you clicking buy and a duck showing up at your door, and why two of these five take most of a day.

Five 3D printed Christmas ducks lined up after printing

An order comes in at 11pm. By the time we see it the next morning, nothing has happened yet. There is no warehouse shelf with your duck on it, no box waiting to be picked. The duck you ordered does not exist.

That is the part people don't expect about buying from a small 3D printing shop. Everything is made after you order it, one at a time, on machines sitting in a room in Jonesboro, Arkansas. Here is what that actually looks like, using the five Christmas ducks as the example.

It starts with a question, not a design

Every duck starts with the same question: what would make someone laugh when they open the box?

Santa was the obvious one. A duck in a red suit is a joke that works instantly, and it's the one people picture when they think "Christmas duck." That made it the right place to start, because the first duck in a collection has to be the one nobody has to explain.

Snowman and Christmas Tree came from the same instinct: take a shape everyone already knows from holiday decorating and put a duck inside it. The Christmas Tree Duck ended up with a gold star on top and ornaments down the sides, which looked great on screen and caused problems later.

Reindeer and Gingerbread are the two that turned into real work. They're also the two we're most attached to.

Designing is mostly deleting

The first version of a duck always has too much detail. Fine lines that look sharp on a monitor disappear completely at 2.5 inches tall, and anything that sticks out too far becomes something that can snap off in a mailbox.

So most of the design time is spent taking things away. Thicker edges, rounder corners, details made bigger than feels right on screen so they survive at real size. The goal is a duck that still reads clearly after it has been printed, packed, shipped, and knocked off a desk twice.

Slicing is where the time gets decided

Before anything prints, the model gets sliced: cut into hundreds of thin layers with instructions for how the printer should move. This is the step where you find out what a duck is going to cost you in hours.

The real numbers for the Christmas set, printed as a batch:

  • Snowman — 5 ducks in 8 hours 42 minutes
  • Christmas Tree — 5 ducks in 10 hours 9 minutes
  • Gingerbread — 7 ducks in 11 hours

An overnight print either works or wastes a night. There isn't much in between.

The gingerbread problem

The Gingerbread Duck is the hardest thing we make, and the reason is color.

A gingerbread man isn't one brown shape. It's brown with white icing trim, buttons and a red bow tie. Every one of those color changes means the printer stops, swaps filament, purges the old color out of the nozzle and starts again. Multiply that by every layer where a color appears and you get an 11-hour print with more chances to fail than anything else on the bench.

When it fails, it usually fails late. That's the part that hurts. You don't lose ten minutes, you lose most of a day and the filament that went with it.

We kept it in the set anyway, because it's the duck people react to most. It's also why it costs $13.99 while the Snowman is $12.99. That dollar isn't a markup, it's the failure rate.

Gingerbread duck figurine, the hardest of the Christmas ducks to print

The reindeer isn't printed, it's assembled

The Reindeer Duck takes the other kind of time: not machine hours, but hands.

The antlers print separately. They're too thin and too branched to come out well attached to the body, so they come off the plate as their own parts and get glued on one duck at a time, lined up by eye so the duck doesn't end up looking like it's leaning. At about 4 inches with the antlers on, it's the tallest of the five and the one most likely to arrive damaged if it isn't packed properly.

Then the scarf gets tied by hand, every one of them, and the bell version gets its bell fitted by hand too. That's three separate manual steps on a duck that costs $13.99.

If you've ever wondered why a small shop can't just "print more and ship faster," this is it. The printer finishing is the halfway point, not the end.

What the other three teach you

The tree's star topper has the same problem as the antlers from the opposite direction: it sticks out into empty space, so the printer builds support material underneath it, and that support has to come off afterwards without taking the star with it. It's the fiddliest cleanup of the set.

The Snowman is the friendliest of the five. Fewer color changes, nothing sticking out, under nine hours for a batch of five. That's why it's the one we always seem to have in stock.

And Santa is the baseline. Every time we change a setting, Santa is the one we print first to see whether the change helped or hurt.

After the printer stops

A finished print isn't a finished duck. Each one comes off the plate, gets its supports removed by hand, gets checked for stringing and rough spots, gets assembled if it needs assembling, and gets cleaned up. Ducks that don't pass don't get sold.

Then it's packed and shipped with tracking. Most orders go out within 4 to 7 business days, which sounds slow until you remember the duck didn't exist when you clicked buy.

Why we still do it this way

Making things to order means we can offer colors and custom text no factory would bother with for one person. It also means we can't ship in 24 hours, and we never will.

After more than 2,000 orders, the thing we've learned is that most people don't mind waiting a few days if they know what they're waiting for. So now you know: somewhere in Arkansas, a machine is spending 11 hours on a gingerbread duck and hoping it doesn't fail at hour nine, and someone is sitting at a table tying a very small scarf.

Meet the Christmas Duck Set — 3 ducks for $34.99 or all 5 for $49.99

Free US shipping over $35. Printed, assembled and packed by hand in Jonesboro, Arkansas.

Frequently asked questions

How long does it take to 3D print a duck?

Between about 1.5 and 2 hours each, depending on the design. We print in batches, so a tray of five snowman ducks takes 8 hours 42 minutes and a tray of seven gingerbread ducks takes 11 hours.

Why do multicolor 3D prints take so much longer?

Every color change means stopping, swapping filament and purging the nozzle before printing resumes. A design with several colors in the same layer can spend more time changing color than printing.

Are 3D printed figurines assembled by hand?

Ours are, when the design needs it. The reindeer's antlers are printed separately and glued on, and its scarf and bell are fitted by hand, one duck at a time.

How long until my order ships?

Most orders are made and packed within 4 to 7 business days, then shipped with tracking.

Back to blog